Earthing Connectors
We manufacture Moisture Barrier Kits and Moisture Barrier Wires in 1M and 2M standard lengths plus custom lengths on request. These are used to secure earth continuity to cable sheath and create moisture barrier connections. We also stock the necessary Riveting Tool.
Moisture Barrier Wire 1M (Kit)
1 Metre Length
The Cable Joint Continuity Kit offers a a rapid, effective and durable method of maintaining electrical continuity in the aluminium moisture barrier at a joint or gap in the sheath of a polythene sheathed cable.
The Cable Joint Continuity Kit comprises a length of continuity wire with a connector ready-soldered to each end accompanied by 2X Washers and 2X Monel Rivets.
The soldered joints are protected by heat shrink sleeving to minimise the possibility of damage by manipulation during cable jointing. Each connector has sharp spikes which penetrate the aluminium moisture barrier screening and lodge firmly in the insulation.
A hole in the centre of the connector admits a rivet which has a head preformed at one end. To facilitate correctly positioned crimping, the connector has a tab which locates into a hole in the riveting tool.
Please enquire for full Data Sheet.
Moisture Barrier Wire 2M (Kit)
2 Metre Length
The Cable Joint Continuity Kit offers a a rapid, effective and durable method of maintaining electrical continuity in the aluminium moisture barrier at a joint or gap in the sheath of a polythene sheathed cable.
The Cable Joint Continuity Kit comprises a length of continuity wire with a connector ready-soldered to each end accompanied by 2X Washers and 2X Monel Rivets.
The soldered joints are protected by heat shrink sleeving to minimise the possibility of damage by manipulation during cable jointing. Each connector has sharp spikes which penetrate the aluminium moisture barrier screening and lodge firmly in the insulation.
A hole in the centre of the connector admits a rivet which has a head preformed at one end. To facilitate correctly positioned crimping, the connector has a tab which locates into a hole in the riveting tool.
Please enquire for full Data Sheet.
Riveting Tool
Hand Operated
The Riveting Tool is similar to a G-clamp and is hand operated, having a spigot spindle which screws down on to a locating pin or anvil.
By placing the head of the Monel Rivet with a washer on the spigot and a connector, with the spikes pointing upwards on to the anvil, the spindle can be screwed down on to a cable sheath to make a firm mechanical and electrical connection.
Please enquire for full Data Sheet.